Addendum to Teo En Ming's Guide to Configuring Asterisk/FreePBX with Cisco 7960 IP Phones

Subject: Addendum to Teo En Ming's Guide to Configuring Asterisk/FreePBX with Cisco 7960 IP Phones


Author: Mr. Turritopsis Dohrnii Teo En Ming (TARGETED INDIVIDUAL)


Country: Singapore


Date: 25 Dec 2020 Friday Singapore Time


Type of Publication: Plain Text


Document version: 20201225.01


=========================================================================================


Please refer to Teo En Ming's earlier guide.


Guide: Teo En Ming's Guide to Configuring Asterisk/FreePBX with Cisco 7960 IP Phones

Link: http://lists.digium.com/pipermail/asterisk-users/2020-December/295581.html


In the above mentioned guide, under Section 12: Caveats, it was mentioned as follows:


"I can now make outgoing phone calls on my Cisco 7960 IP phone.


However, if Voicemail in my extension configuration is set to Disabled, 

and when I try to dial my DID number, it says "Number not valid".


Only when I change Voicemail to Enabled, and when I try to dial my DID 

number, it says:


"The person at extension 1600 is unavailable. Please leave your message 

after the tone, when done hang up or press the # key."


It seems that incoming calls will not be routed to extension 1600.


I will need to do more troubleshooting on this at a future date."


Now, I am pleased to announce that, this final issue has been resolved on Christmas Day 2020.


The steps taken to resolve this final issue are as follows:


Login to Teo En Ming's FreePBX GUI at https://192.168.1.9.


Click Applications > Extensions.


Click the Pencil icon to edit the PJSIP extension 1600.


Click Advanced tab.


For Rewrite Contact, you MUST change the setting from Yes to No.


Click Voicemail tab.


Change Enabled to Yes.


For Require From Same Extension, click Yes.


Click Submit.


You MUST click Apply Config for the changes to take effect!


Voila! All issues have been solved.


Mr. Turritopsis Dohrnii Teo En Ming, 42 years old as of 25 December 2020 Friday, is a TARGETED INDIVIDUAL (TI) living in Singapore. He is an IT Consultant with a System Integrator (SI)/computer firm in Singapore. He is an IT enthusiast.




REFERENCES

==========


[1] http://lists.digium.com/pipermail/asterisk-users/2020-December/295590.html


[2] https://marc.info/?l=netfilter&m=160887342710427&w=2


[3] https://lists.sandelman.ca/pipermail/tcpdump-workers/2020-December/001596.html


[4] http://lists.linuxfromscratch.org/pipermail/lfs-chat/2020-December/029175.html

Comments

Post a Comment

Popular posts from this blog

[24 Mar 2022 Thursday] Erectile Dysfunction and Viagra

Image
Subject: [24 Mar 2022 Thursday] Erectile Dysfunction and Viagra I have erectile dysfunction due to taking medications for mental illness (schizophrenia). Without Viagra, my penis is soft like jelly most of the time. There is no way I can penetrate a woman’s vagina due to erectile dysfunction. Today is the very 1st time I am taking Viagra. It allows my penis to remain hard and fully erected for 2 solid hours during sexual intercourse. Thanks Viagra! I can finally have sex! I am already 44 years old. What am I missing out in life?????? Do I still qualify to be a Japanese Adult Video (JAV) porn star actor???????? Link:  https://m.facebook.com/story.php?story_fbid=10158113552827735&id=646397734
Read more

Patching Linux Kernel 5.5.7 to Add Support for AUFS Filesystem

Subject of Hint: Patching Linux Kernel 5.5.7 to Add Support for AUFS Filesystem ORIGINAL AUTHOR: JIMMY ANDERSON ORIGINAL DATE: 2013-01-20 EDITED BY: TURRITOPSIS DOHRNII TEO EN MING, SINGAPORE EDIT DATE: 15 MAR 2020 SUNDAY MANDATORY PREREQUISITES ======================= You *MUST* follow the guide/hint here first (COMPULSORY): http://lists.linuxfromscratch.org/pipermail/hints/2020-March/003334.html HINT ==== To obtain the aufs5 kernel patches, do the following:   $ sudo apt install git #------------ Cut and Paste start cd $LFS/sources git clone git://github.com/sfjro/aufs5-standalone.git \ aufs5-standalone.git cd aufs5-standalone.git git checkout -b origin/aufs5.5 cp aufs5-*.patch .. rm -f include/uapi/linux/Kbuild tar cvfz $LFS/sources/aufs5.tar.gz Documentation fs include cd .. rm -rf aufs5-standalone.git #------------ Cut and Paste end Rebuilding your kernel ======================    Follow the instructions in the LFS/BLFS book and build your LF
Read more